Furniture Maintenance Tips
Here are 10 tips to maintenance of furniture to help your furniture look better!
1) To clean the finish of your furniture just use a little warm water and soap. furniture cleaning water will not hurt, but be careful not to wet! Use an old toothbrush for hard-to-get. Clean dirt from the surface with a soft cloth or paper towels until they are completely clean. Then dry the remaining moisture with a soft cloth.
2) After a good cleaning, the best way to protect the finish is to use a good quality wax soft. Apply a thin layer as indicated on the label. Wait 5 minutes and rub lightly with a soft cloth (shoes) brush or cloth. Wait 30 to 60 minutes and varnish / brush again with a little more strength. You will see a return to the light nice finish that will last several months.
3) Keep the furniture in the sun. The temperature of the sun was coming through a window can exceed 140 degrees! He finished his cuisine, bleaching and destruction of them in time, dry and reduce the size of the timber will cause cracking.
4) Do not place furniture near heating units and ventilation. This type of dry heat will also cause the wood to dry and shrink, memory foam mattress leaving you with cracks. I also recommend a humidifier in the driest months of the humidity to 40 – 45% level.
5) For a quick key, use the color of polish scratches and fleas appropriate, especially in the feet to make them less visible. Beware the marker color correct, first to hide better.
6) When the polished brass hardware, remove the furniture first. Take your time and carefully remove the material and make a note to remember what pieces go where. Then use a quality metal polish to get that shine back. Once it is polished, replace care not to scratch the wood surface. I recommend you not try to do everything in one session. It can be hard work, so take a few days to a few pieces each day instead of fatigue and frustration of trying to do everything at once!
7) The wood is not hungry! You can not eat the furniture. No matter what the advertising says, the wood can not be fed or fed or enriched oils and waxes. Once that is done with the equal protection of the beauty and protection, the wood is sealed. Asphalt and those that do not penetrate.
There are several ways to take the blurry white ring or a point that the cup of coffee or a hot pizza box on your desktop. The least invasive way is to rub a mild abrasive such as toothpaste do gel mixed with baking soda or a little bit of cooking oil is mixed with ash. You can rub a small spot with a finger or a soft cloth in large regions. Another way that has excellent results is to place a soft cloth or towel on the ground and soft iron for 10 to 20 seconds at a time with the iron in an intermediate position. Start there and you can always turn the plate a bit if necessary. Keep the iron moving and check your progress regularly.
9) When buying new furniture or old, look back inside, and bottom of furniture and boxes. Often say more about the quality you want in the “show” side. The so-called “secondary” forests can tell a lot about the subject’s age and construction quality.
10) The restoration or refinishing a piece of that age or age of the furniture to its former glory may seem like a good idea, and it often is. But it is important to get advice from someone who knows the subject you are considering. You may find that your work is valuable and may need a good cleaning. More “intrusive” work should be entrusted to a professional.
Incoming search terms:
- varnish
Related posts: